Alkaline fuel cells (AFCs) have been around for long time, for example, they were used in in the U.S. space program to produce electrical energy and water on-board spacecraft. AFCs are attractive due their ability to use non-precious metals as catalysts while operating at lower temperatures, thereby offering a cost effective system. However, their susceptibility to CO2 poisoning has often held back their wider use. The development of polymer membrane to transport the hydroxide anions (Alkaline Membrane Fuel Cells (AMFCs) or Hydroxide Exchange Membrane Fuel Cells (HEMFC)) has managed to lower the susceptibility to CO2 poisoning compared to the traditional liquid-electrolyte AFCs, but CO2 poisoning is still considered a key challenge for their commercial development.
In an exciting turn, researchers for the University of Delaware have turned this problem to their advantage. Specifically, they have utilised how effective the fuel cells are at capturing CO2 to create a new separation system, the results of which have been published in Nature Energy and commented on in Engineering and Technology.
The researchers built their electrochemically driven CO2 separator using a shorted-circuited membrane. This separator is powered by hydrogen but unlike a fuel cell does not need electrical wires, bipolar plates or current collectors.
The separator is envisaged for purifying the air feed into HEMFCs, but could also find application in other areas. It therefore presents an exciting development that we intend to follow.
Finally, we are pleased to see a reference to the technology being patented, which will allow the University to get a return on its investment and fund further exciting research.
The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.
We operate a free-to-view policy, asking only that you register in order to read all of our content. Please login or register to view the rest of this article.